Manual Reset Off Solenoid Valve
Manual reset OFF valve (latching on de-energization) switches ON when energized. Valve does not switch OFF when de-energized till switched OFF manually. This type of valve is used where the valve is required to remain ON even though supply to the solenoid is switched OFF.
Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks.
Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs :
DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry.
With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk).
Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.